D-Link DP-300 User Manual

DP-300 Multiprotocol Fast Ethernet Print Server User’s Guide
Product Specifications
8
A
3 P
RODUCT
S
PECIFICATIONS
Printer Connection
Standards
: IEEE 1284 bi-directional parallel interface, RS-232
Ports:
Bi-directional 25-pin parallel ports × 2, 9-pin DTE serial port × 1
Parallel Port Bi-directional Communication:
Hewlett-Packard PJL (Printer Job Language)
supported
Network Connection
Network Standards
: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet
Network Data Transfer Rate
: 10/100Mbps
Network Connector
: RJ-45 connector for 10Base-T or 100BASE-TX unshielded twisted pair
connection; NWay automatic speed negotiation supported.
Network Protocols
Ethernet Frame Types:
802.2, 802.3, Ethernet II, SNAP (auto-switching)
Transport Protocols:
IPX/SPX, TCP/IP, NetBEUI, AppleTalk/EtherTalk
TCP/IP Protocols Supported:
BOOTP, SNMP, Telnet, TFTP, FTP, lpd
Management and Diagnostics
Standard:
SNMP
MIBs
: MIB-II (RFC 1213)
Diagnostic LED Indicators
: Power/Tx, Link/Rx, LPT1, LPT2, COM

D-Link DP-300 Specifications

General

Brand	D-Link
Model	DP-300
Category	Print Server
Language	English