6
Network Cable Connector
The Print Server’s rear panel features an RJ-45 connector for connection to
10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be
Category 5 twisted-pair cable). The port supports the NWay protocol, allowing the
Print Server to automatically detect or negotiate the transmission speed of the
network.
DC Power Connector
The DC power input connector is located on the Print Server’s rear panel and is
labeled DC 5V.
LED Indicators
The front panel of the Print Server features five LED indicators:
Rear Panel Connectors
Power
Link/Act USB
LPT1
LPT2
Power
LPT2
LPT1
RJ-45
USB
To Next Page
Loading...
