70
Technical Specifications
Printer Connection
Printer Port: IEEE 1284 standard bidirectional parallel interface with 25-pin connector.
USB port (ver 1.1)
Bidirectional Communication: Hewlett-Packard PJL (Printer Job Language) standard
for bidirectional communication.
Network Connection
Network Standards: IEEE 802.3 10Base-T Ethernet
Network Data Transfer Rate: 10/100 Mbps (megabits per second)
Network Connector: RJ-45 connector for 10Base-T Category 5 twisted-pair connection
Network Protocols
Ethernet Frame Types: 802.2, 802.3, Ethernet II, SNAP (auto-switching)
Transport Protocols: TCP/IP, NetBEUI, AppleTalk/EtherTalk, LPR
TCP/IP Protocols Supported: BOOTP, SNMP, Telnet, TFTP, FTP, LPD, RARP, DHCP
Management and Diagnostics
Standard: SNMP
MIBs: MIB-II (RFC 1213)
Diagnostic LED Indicators: Pw, Lk/Act, LPT1, LPT2, USB
Environmental and Physical
Power Supply: External power supply providing 5V/ 2.5A
Dimensions: 7.58" x 4.66" x 1.22" (192.5mm x 118.4mm x 31mm)
Weight: approx. 10.3 oz. (292g)
Operating Temperature: 32 to122°F (0 to 50°C)
Storage Temperature: -13 to 131°F (-25 to 55°C)
Humidity: 5% to 95% non-condensing
Emissions: FCC Class B, CE Class B, VCCI Class B
To Next Page
Loading...
