D-Link DPR-1020 Quick Install Guide

4
LED INDICATORS
Power
USB
Link/Act
The top panel of the Print Server features three LED indicators:
A steady blue light conrms that the Print Server is turned ON.
A steady blue light indicates the printer is online and successfully connected to
the print server. This light will also blink to indicate that data is being transferred
between the print server and printer.
A steady blue light conrms that the Print Server has a connection to an Ethernet
network. This light will also blink when receiving or transmitting data on the
network.
These three LED indicators are also used during the device’s power-on self test to
indicate any hardware failures. Please refer to the User Manual for more information
about this test.

D-Link DPR-1020 Specifications

General

Networking standards	IEEE 802.3, IEEE 802.3u
Network connection type	Ethernet LAN
Dimensions (WxDxH)	67 x 106 x 25 mm
Power requirements	5.0V DC/2.5A
Compatible operating systems	Windows Vista/XP/2000/NT4/ME/98SE/95 Apple Mac OS 9.x - MAC OS X 10.4.x Linux UNIX lpr/lpd (HP-UX, SunOS, Solaris, SCO, UnixWare, IBM AIX) NetWare 5.x
DC-in jack	Yes
USB 2.0 ports quantity	1
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C
Certification	FCC Class B, CE, C-Tick, IC, CSA
Package depth	225 mm
Package width	150 mm
Package height	75 mm
Package weight	520 g

Weight and Dimensions

Depth	106 mm
Width	67 mm
Height	25 mm
Weight	77 g