19D-Link DPR-1260 User Manual
Section 3 - Configuration
Transmitted wireless packets larger than this
size will be fragmented to maintain performance
in noisy wireless networks. The valid range is
256-65535. Values larger than about 1560 will
prevent fragmentation from taking place.
Transmitted wireless packets larger than this size
will use the RTS/CTS protocol to (a) maintain
performance in noisy wireless networks and
(b) prevent hidden nodes from degrading
performance. The valid range is 1-65535. Values
larger than about 1560 will prevent RTS/CTS
from taking place.
Set the time duration here for transmission
burst mode, in microseconds. The valid range is
0-65535 with 0 to disable bursting. Burst mode
can increase data throughput by occupying
the channel for an extended duration. Typical
values are in the range of several mili-seconds
(ie. 3000).
In adhoc mode beacons are sent out periodically.
This is the number of milliseconds between
each beacon. The valid range is 1 - 65535.
Fragmentation
Threshold:
Advanced Wireless Settings
If you are not familiar with these Advanced Wireless settings, please read the help section before attempting to modify these settings.
RTS Threshold:
Burst Time:
Beacon Period:
To Next Page
Loading...
