Section 3 - Configuration
D-Link DSL-2740B User Manual
27
STEP 5: Setup Wizard - For LAN Settings
You can configure the LAN IP address to suit your preference. Many users
will find it convenient to use the default settings together with DHCP
service to manage the IP settings for their private network. The IP address
of the Router is the base address used for DHCP. In order to use the
Router for DHCP on your LAN, the IP address pool used for DHCP must
be compatible with the IP address of the Router. The IP addresses
available in the DHCP IP address pool will change automatically if you
change the IP address of the Router.
Enter the desired IP address and Subnet Mask.
Enter the Start and Stop IP Address for the DHCP Server, or disable
DHCP Server.
Click Next to go to the next Setup Wizard window.
STEP 6: RESTART
Click Back to review or modify settings. Click on Finish to apply current
settings. If your Internet connection does not work after the wizard setup
configuration, you can try the Setup Wizard again with alternative
settings or use Manual Setup instead if you have your Internet connection
details as provided by your ISP.
To Next Page
Loading...
Need help?
ADSL Standards
