Section 3 - Configuration
D-Link DSL-2740B User Manual
64
FILTERING OPTION
Use this section to configure the FILTER OPTION setting for your D-Link router. Please note that changes made in this section will also need to be
duplicated onto your wireless clients and PC.
To access the FILTER OPTION settings window, click on the FILTER OPTION button in the ADVANCED directory.
INBOUND IP FILTER
Manage incoming traffic. The filter can be used
when NAT is disabled or co-work with Port
Triggering.
OUTBOUND IP FILTER
Manage outgoing traffic.
BRIDGE FILTER
Uses MAC address to implement filtering. Useful
only in bridge mode.
To Next Page
Loading...
