Section 3 - Configuration
D-Link DSL-2740B User Manual
93
SYSTEM LOG
The system log displays chronological event log data. The event log can be read from local host or sent to a System Log server. The available event
severity levels are: Emergency, Alert, Critical, Error, Warning, Notice, Informational and Debugging.
To access the SYSTEM LOG setting window, click on the System Log button under the MAINTENANCE tab.
The System Log dialog allows you to view the System Log and
configure the System Log options.
Click "View System Log" to view the System Log.
Click "Configure System Log" to configure the System Log
options.
CONFIGURE SYSTEM LOG
Log Level:
All events above or equal to the selected level will
be logged.
Display
Level:
All logged events above or equal to the selected
level will be displayed.
Mode:
Display mode of system log. Local: Display on local
host only Remote: Send log file to remote system
log server only
Server IP
Address:
IP address of the remote system log server
Server UDP
Port:
UDP port number of the remote system log server
To Next Page
Loading...
Need help?
ADSL Standards
