Section 3 - Configuration
D-Link DSL-2740B User Manual
50
TIME
The TIME configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you
can set the time zone that you are in and set the NTP (Network Time Protocol) Server. Daylight Saving can also be configured to automatically
adjust the time when needed.
To access the TIME setting window, click on the Time and Date button in the SETUP directory
TIME
Check the Automatically synchronize with Internet time servers.
Select specific time server to use from the NTP Server drop-down
menu.
Select your operating time zone from the Time Zone drop-down
menu.
Check the Enable Daylight Saving if needed and then select the
proper Daylight Saving Offset drop-down menu. Configure the
Daylight Saving Dates from start date to end.
Click on the Apply button to apply your settings.
Set the Date and Time Manually
You can either manually set the time for your router here, or you can
click the "Copy Your Computer's Time Settings" button to copy the
time from the computer you are using.
To Next Page
Loading...
Need help?
ADSL Standards
