D-Link DSL-2740B User Manual

Section 3 - Configuration
D-Link DSL-2740B User Manual
90
Admin
The Admin option is used to set a password for access to the
Web-based management. By default there is no password
configured. It is highly recommended that you create a password to
keep your new router secure.
Access to your DSL Router is controlled through three user
accounts: admin, support, and user.
Admin Password
Enter a password for the user "admin", who will have full access to
the Web-based management interface.
Support Password
Allows an ISP technician to access your DSL Router for
maintenance and to run diagnostics.
User Password
Allows to view configuration settings and statistics, as well as
update the router's firmware.
Services
Allows acc
ess to the router via HTTP, ICMP, SNMP, TELNET, and
TFTP.
LAN
Accesses the DSL router from the local network (LAN) side.
WAN
Accesses the DSL router from the ISP side.

D-Link DSL-2740B Specifications

ADSL Standards

downstream data rate	up to 8 Mbps
upstream data rate	up to 1 Mbps
G.lite downstream data rate	up to 1.5 Mbps
G.lite upstream data rate	up to 512 Kbps
G.dmt.bis downstream data rate	up to 12 Mbps
G.dmt.bis upstream data rate	up to 12 Mbps

ADSL2 Standards

full rate downstream data rate	up to 24 Mbps
full rate upstream data rate	up to 1 Mbps

Wireless LAN

wireless speed	up to 300 Mbps
frequency range	2.4 GHz to 2.484 GHz
antennas	2 non-detachable dipole