D-Link DSL-2750B - Page 122

Appendix E – D-Link SharePort
D-Link DSL-2750B User Manual
122
 Set up the D-Link Router
1. Connect the D-Link Router to the network.
2. Power on the D-Link Router.
3. Double-click on the icon to open the D-Link SharePort.
4. Right-click on in the System Tray at the lower-right corner on
your Windows Desktop. A window pops up to display the D-Link
Router.
 Enable Network USB on the D-Link Router
1. Click on the D-Link Router.
2. Click on
Enable
.
3. The icon in the Windows System Tray should change to a icon.
 Connect USB Devices to the D-Link Router
The D-Link SharePort automatically detects for each connected USB
device. A window will pop up for each detected USB device.