Section 3 - Configuration
D-Link DSL-2750B User Manual
24
STEP 3: SETUP INTERNET CONNECTION
Please select your Country and ISP Provider, then the Protocol,
VPI/VCI, and Connection Type will auto input the correct information.
If you cannot find the country and ISP in the list below; you can select
Others, and then input the Protocol, VPI/VCI and Connection Type.
Please enter the VPI/VCI numbers if they are different and you have been
instructed to do so by the ISP.
Click on the Next button to go to the next Setup Wizard window.
If your Protocol selects PPPoE or PPPoA, you need to enter your
Username and Password as provided by your ISP
Click on the Next button to go to the next Setup Wizard window.
To Next Page
Loading...
