D-Link DSL-2750B - Page 26

Section 3 - Configuration
D-Link DSL-2750B User Manual
26
STEP 4: CONFIGURE WIRELESS NETWORK
Please check Enable Your Wireless Network box to enable your
wireless network.
Enter Wireless Network Name (SSID) to identify your wireless network.
Visibility Status selects Visible can be found by wireless clients,
Invisible to hide your wireless network
Choose one wireless encryption mode for your wireless network. The
Security Level from low to high as below:
None < WEP < WPA-PSK < WPA2-PSK
Click on the Next button to go to the next Setup Wizard window.