D-Link DSL-3785

30D-Link DSL-3785 User Manual
Section 4 - Conguration
WAN Settings
Dynamic IP (DHCP)
Select to obtain an IP address automatically
from your ISP. Select this option if your ISP does not provide you with a specic
IP address.
WAN Settings
Connection: Select .
WAN
Connection Type: Select Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC, or Routed
IP VC-Mux.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Usage: Select None or Default Route.
NAT Enable: Enable or disable Network Address Translation.
Enable PPPoE
Passthrough:
Enable or disable PPPoE Passthrough.
Option60 Vendor
ID:
The vendor class identier is listed here.
Click Save when you are done.