57D-Link DSL-3785 User Manual
Section 4 - Conguration
Static Route
The Static Routes section allows you to dene custom routes to control how
data trac is moved around your network. To access this page, click Static
Route from the menu on the bar on the top of the page.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the button. Click Save when you are done.
If you edit or create a rule, the following options will appear:
Create New Rule
Destination
Address:
Enter the destination IP address of packets that will take this route.
Destination
Subnet Mask:
Enter the destination for this route.
Gateway IP
Address:
Enter your next hop gateway to be taken if this route is used.
Metric: The route metric is a value from 1 to 16 that indicates the cost of using
this route. A value 1 is the lowest cost and 15 is the highest cost.
Click when you are done.
To Next Page
Loading...
