D-Link DWA-127 Quick Installation Guide

7
ENGLISH
SETUP  DRIVERS PRELOADED ONTO A CD
Insert the Driver CD into the CD drive. When the autorun screen
appears, click Install and follow the on-screen instructions.
Note: If the CD Autorun function does not automatically start on
your computer, press the Windows Key + “R”. In the run box type
“D:\autorun.exe” (where D: represents the drive letter of your CD
drive) and click OK.
1 /
Note: Do not plug in your Wi-Fi adapter until instructed.
The welcome screen will appear. Follow the wizard’s instructions
to complete the setup. Only plug the Wi-Fi adapter into your
computer when instructed to.
2 /
ENJOY!
You’re all good to go! Connect your computer to your network
using the Wi-Fi Name (SSID) and password of the Wi-Fi network you
wish to connect to.

D-Link DWA-127 Specifications

Power

power consumption (Tx)	230 mA
power consumption (Rx)	140 mA
operating voltage	5 VDC +/- 5%

Operating Environment

operating temperature	32°F to 104°F (0°C to 40°C)
operating humidity	10% to 90% maximum (non-condensing)
frequency range	2.4GHz to 2.483GHz

Weight and Dimensions

dimensions	210 x 15 x 14 mm
weight	12.8 g