D-Link DWC-2000

Introduction
This guide gives step-by-step instructions for setting up your D-Link DWC-2000 Wireless Controller. Please
note that the model you have purchased may appear slightly different from those shown in the illustrations.
The DWC-2000 Wireless Controller is a full-featured wireless LAN controller designed for medium to large
network environments. The controller has a range of network and access point management functions, can
control up to 64 access points by default, and up to 256 with license pack upgrades.
The DWC-2000 can be upgraded with three optional license packs:
• The DWC-2000-AP32/DWC-2000-AP32-LIC License Packs allow management of up to 32 additional
access points.
• The DWC-2000-AP64/DWC-2000-AP64-LIC License Packs allow management of up to 64 additional
access points.
• The DWC-2000-AP128/DWC-2000-AP128-LIC License Packs allow management of up to 128 additional
access points.
The DWC-2000 can be upgraded multiple times with license packs, enabling support for up to a maximum of
256 access points.
Package Contents
• DWC-2000 Wireless Controller
• Power Cord
• Console Cable (RJ-45 to DB-9 Cable)
• Ethernet Cable (CAT5 UTP/Straight Through)
• Reference CD
• Rack Mounting Brackets (2)
• Screws Pack
• QIG
Product Overview