10
ENGLISH
Management Options
Before You Begin
The D-Link router can be managed by using the Web User
Interface (Web UI), Telnet, or Simple Network Management
Protocol (SNMP) management interfaces. If you wish to
manage a single D-Link router, the Web UI may be the best
option. Each router must be assigned its own IP address,
which is used for communication with the management PC.
Please refer to the following installation instructions to get
started with the Web UI and SNMP management interfaces.
Web User Interface
Once the router has been successfully installed, you can begin
conguration, monitor the LED panel, and display graphical
statistics using a web browser. Supported browsers include:
Microsoft
®
Internet Explorer , Firefox, Chrome, and Safari.
You need the following equipment to access the Web UI of
your device:
• A PC with a RJ-45 Ethernet port
• A standard Ethernet cable
DWM-321D/DWM-321
To Next Page
Loading...
Need help?
General
