8
ENGLISH
Powering the Router
The router features a exible power input ranging from
9 volts/2.7 amps to 36 volts/0.7 amps. A minimum of 10 watts
total power is recommended.
Using the Included AC Adapter
1. Connect the red electrical wire of the AC adapter to the PWR
port.
2. Connect the black electrical wire of the AC adapter to the
GND port.
3. Attach the AC adapter to an appropriate AC socket.
Powering from your vehicle
1. Attach the included terminal block into the terminal block
slot of the DWM-321D/DWM-321.
2. Connect electrical wires from your vehicle to the PWR and
GND ports.
DWM-321D/DWM-321
To Next Page
Loading...
Need help?
General
