DWR-921 Quick Installation Guide
In order to connect your device to the network of a 3G or LTE operator, on the
Device mode page, from the Connection method list, select the Mobile
Internet value. In this mode you can configure an LTE WAN connection, set
your own settings for the wireless network, and set your own password for
access to the web-based interface of the device.
In order to connect your device to a wireless ISP (WISP), on the Device
mode page, from the Connection method list, select the Wi-Fi value.
Then from the Work mode list select the WISP Repeater value. In this
mode you can connect your device to another access point, configure a WAN
connection, set your own settings for the wireless network, and set your own
password for access to the web-based interface of the device.
24
To Next Page
Loading...
