EasyManua.ls Logo

D-Link DWR-921 - Default Settings

D-Link DWR-921
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DWR-921 Quick Installation Guide
Default Settings
Domain name of device
dlinkrouter.local.
IP address of device
192.168.0.1
Username (login)
admin
Password
admin
Name of wireless network (SSID)
DWR-921
Network key (PSK)
see WPS PIN on the barcode
label on the bottom panel of
the device
!
Clients connected to the router with default settings do not have access
to the Internet. To get started, please set your own password for access
to the web-based interface and change the WLAN name (SSID); then,
if needed, configure other settings recommended by your ISP.
3

Other manuals for D-Link DWR-921

Related product manuals