DWR-921 Quick Installation Guide
CONNECTING TO PC
PC with Ethernet Adapter
1. Insert a SIM card into the slot on the back panel of the router with the
gold contacts facing downwards and gently push until it clicks.
!
If you need to connect a SIM card or change it to another one when the
router is powered on, power off the router, insert or change the SIM
card, and power on the router.
2. Connect an Ethernet cable between any of LAN ports located on the back
panel of the router and the Ethernet port of your PC.
3. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
4. Turn on the router by pressing the POWER ON/OFF button on its back
panel.
Make sure that your Ethernet adapter is configured to obtain an IP address
automatically (as DHCP client).
5
To Next Page
Loading...
