D-Link DWS-3160-24TC - Page 267

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
262
Figure 11-84 Client Connection Status window
The fields that can be displayed are described below:
Parameter Description
Client IP Address
Display the IP address of the wired client (if applicable).
User Name
Display the user name (or Guest ID) of the connected client.
CP Configuration
Display the CP configuration the wired client is using.
Interface
Display the interface the wired client is using.
Protocol
Display the current connection protocol, which is either HTTP or HTTPS.
Verification
Display the current account type, which is Guest, Local, or RADIUS.
Session Time
Display the amount of time that has passed since the client was authorized.
Switch MAC Address
Display the MAC address of the switch handling authentication for this client. If
clustering issupported, this field might display the MAC address of a peer switch in
the cluster.
Switch Type
Display whether the switch handling authentication for this client is the local switch or
a peer switch in the cluster.
Switch IP Address
Display the IP address of the switch handling authentication for this client. If clustering
is supported, this field might display the IP address of a peer switch in the cluster.
Use the drop-down menu to select the MAC address of the associated client to view the detail information.
After clicking the Client Statistics tab, the following page will appear: