D-Link DWS-3160-24TC - Differentiated Services

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
451
CoS
Tick the check box and enter the 802.1p user priority to compare against an
Ethernet frame.
Destination BPDU
Tick the check box to use multicast address 01:80:C2:00:00:00 as destination MAC
and mask is FF:FF:FF:00:00:00.
Destination MAC
Tick the check box and enter a MAC address and an Ethernet frame’s destination
MAC address must match the address.
Destination MAC Mask
Enter the mask of the destination MAC, when the Destination MAC check box is
selected.
Ethertype Key
Tick the check box and use the drop-down menu to select EtherType. A packet’s
EtherType must match the selected EtherType. When selecting User Value, the
Ethertype Value field appears. Enter a custom value in the field.
Source MAC
Tick the check box and enter a MAC address and an Ethernet frame’s source MAC
address must match the address.
Source MAC Mask
Enter the mask of the source MAC, when the Source MAC check box is selected.
VLAN
Tick the check box and enter an ID of the VLAN. A packet’s VLAN ID Must match
the entered ID.
Click the Apply button to accept the changes made.
Click the Cancel button to discard the configuration.
Differentiated Services
The QoS feature contains Differentiated Services (DiffServ) support that allows traffic to be classified into streams
and given certain QoS treatment in accordance with defined per-hop behaviors.
Diffserv Configuration
This window is used to display the differentiated services general status information, which includes the current and
maximum number of rows in each of the main DiffServ private MIB tables.
To view this window, click QoS > Differentiated Services > Diffserv Configuration as shown below:
Figure 4-20 Diffserv Configuration window
Class Configuration
This window is used to add a new Diffserv class name, or rename or delete an existing class.
To view this window, click QoS > Differentiated Services > Class Summary as shown below: