D-Link DWS-3160-24TC - Upload Log File

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
464
Upload Configuration To TFTP
This page allows the user to upload the configuration file from the Switch to a TFTP Server.
Figure 2-7 Upload Configuration – TFTP window
The fields that can be configured are described below:
Parameter Description
TFTP Server IP
Enter the TFTP server IP address used.
IPv4
Click the radio button to enter the TFTP server IP address used.
IPv6
Click the radio button to enter the TFTP server IPv6 address
used.
Destination File
Enter the location and name of the Destination File.
Source File
Enter the location and name of the Source File.
Filter Use the drop-down menu to include, begin or exclude a filter like SNMP, VLAN or STP.
Select the appropriate Filter action and enter the service name in the space provided.
Click Upload to initiate the upload.
Upload Configuration To HTTP
This page allows the user to upload the configuration file from the Switch to a computer.
Figure 2-8 Upload Configuration – HTTP window
The fields that can be configured are described below:
Parameter Description
Source File
Enter the location and name of the Source File.
Click Upload to initiate the upload.
Upload Log File
The following window is used to upload the log file from the Switch.