DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
342
Figure 2-11 Peer Switch – Managed AP window
Use the drop-down menu to select the IP address of a peer switch.
The fields that can be displayed are described below:
Parameter Description
Total number of entries displayed in the table below.
The MAC address of each AP managed by the peer switch.
The IP address of the peer switch that manages the AP.
The descriptive location configured for the managed AP.
The IP address of the AP.
The AP profile applied to the AP by the switch.
The Hardware ID associated with the AP hardware platform.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Access Point
All AP Status
This window is used to display summary information about access points that the Switch has discovered or
detected.
To view this window, click Monitoring > Access Point > All AP Status as shown below: