D-Link DWS-3160-24TC - Page 381

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
376
authenticated. The possible range is from -128 to 128 dBm.
Noise
Last channel noise reported by the managed AP with which the client is
authenticated. The possible range is from -128 to 128 dBm.
Probe Req Recorded
Number of probe requests recorded so far during the probe collection interval.
Probe Collection Interval
Display the amount of time spent in each probe collection period. The probe
collection helps the switch decide whether the client is a threat.
Highest Probes Detected
Display the largest number of probes that the switch detected during a probe
collection interval.
Channel
Display the channel that the client is using.
OUI Description
Display the organization unique identifier for the wireless client.
Auth Msgs Recorded
Display the number of IEEE 802.11 Authentication messages recorded so far
during the authentication collection interval.
Auth Collection Interval
Display the amount of time spent in each authentication collection period. The
authentication collection helps the switch decide whether the client is a threat.
Highest Auth Msgs
Display the largest number of authentication messages that the switch detected
during an authentication collection interval.
De-Auth Msgs Recorded
Display the number of IEEE 802.11 De-Authentication messages recorded so
far during the de-authentication collection interval.
De-Auth Collection Interval
Display the amount of time spent in each de-authentication collection period.
The de-authentication collection helps the switch decide whether the client is a
threat.
Highest De-Authe msgs
Display the largest number of de-authentication messages that the switch
detected during a de-authentication collection interval.
Authentication Failures
Display the number of 802.1X Authentication failures detected for this client.
Probes Detected
Display the number of probes detected in the last RF Scan.
Broadcast BSSID Probes
Display the number of probes to broadcast BSSID in the last RF Scan.
Broadcast SSID Probes
Display the number of probes to broadcast SSID in the last RF Scan.
Specific BSSID Probes
Display the number of probes to a specific BSSID in the last RF Scan.
Specific SSID Probes
Display the number of probes to a specific SSID in the last RF Scan.
Last Non-Broadcast BSSID
Display the last non-broadcast BSSID detected in the RF Scan, which is a MAC
address.
Last Non-Broadcast SSID
Display the name of the last non-broadcast SSID detected in the RF Scan.
Threat Mitigation Sent
Display whether threat mitigation has been done for this client.
Click the Acknowledge Rogue button to clear the rogue status of the client.
After clicking the WIDS Client Rogue Classification tab under the Detected Client Summary tab, the following
page will appear: