D-Link DWS-3160-24TC - Page 500

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
495
Tunnel-Type (64)
For dynamic VLAN
usage.
VLAN (13)
Optional
Tunnel-Medium-Type (65)
For dynamic VLAN
usage.
802
Optional
Tunnel-Private-Group-ID
(81)
For dynamic VLAN
usage.
VLANID
Optional
If the global MAC Authentication action is configured as “White List”, then any wireless clients with MAC addresses
that are specified in the list, and are not explicitly denied access, are granted access. If MAC address is not in the
list, then the access to the client is denied.
If the global MAC Authentication action is configured as “Black List”, then any wireless clients with MAC addresses
that are specified in the list, and are not explicitly granted access, are denied access. If MAC address is not in the
list, then the access to the client is granted.
The following table indicates the RADIUS attributes that are used to configure Captive Portal users. The table
indicates both RADIUS attributes and vendor specific attributes (VSA) that are used to configure Captive Portal.
Captive Portal RADIUS Attributes
Attribute
Description
Range
Usage
Default
User-Name (1)
User name to be
authorized
1-32 characters
Required
None
User-Password (2)
User password
8-64 characters
Required
None
Session-Timeout (27)
Logout once session
timeout is reached
(seconds). If the attribute
is 0 or not present, then
use the value configured
for the Captive Portal.
Integer (seconds)
Optional
86400
Idle-Timeout (28)
Logout once idle timeout
is reached (seconds). If
the attribute is 0 or not
present, then use the
value configured for the
Captive Portal.
Integer (seconds)
Optional
0
Vendor-Specific (26),
WISPr (14122),
WISPr-Bandwidth-Max-
Down (8)
Maximum client receive
rate (b/s). Limits the
bandwidth at which the
client can receive data
from the network. If the
attribute is 0 or not
present, then use the
value configured for the
Captive Portal.
Integer Optional 0
Vendor-Specific (26),
WISPr (14122),
WISPr-Bandwidth-Max-Up
(7)
Maximum client transmit
rate (b/s). Limits the
bandwidth at which the
client can send data into
the network. If the
attribute is 0 or not
present, then use the
value configured for the
Captive Portal.
Integer
Optional
0
Vendor-Specific (26),
D-Link (171),
LVL7-Max-Input-Octets
Maximum number of
octets the user is allowed
to transmit. After this limit
Integer
Optional
0