DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide
12
Figure 2- 7. Front view of the DPS-700
RPS Rack-Mountable Chassis, the DPS-800
Because of the small size of the DPS-200, the DPS-800 can be used to house and mount the DPS-200 into a switch
rack. The DPS-800 is a standard-size rack mount (1U) designed to hold up to two DPS-200 redundant power
supplies. Using this rack mount chassis, will allow the user to save space when deploying the DPS-200 RPS’s into a
switch rack.
Figure 2- 8. Installing the DPS-200 in the DPS-800
The RPS can be mounted in a standard 19" rack. Use the following diagram to guide you.
To Next Page
Loading...
