+3 &-&
When configuring a network, users will most likely have to add a server or two to this switch. Generally, any
port on this switch can be used to connect to a server.
7(:,/
;<!<7(:&4
After successfully installing the Switch, the user can configure the Switch, monitor the LED panel, and
display statistics graphically using one of the Web browsers given below:
• Internet Explorer (version 6.0 and later)
• Netscape (version 7.0 and later)
• Mozilla Firefox (version 3.0 and later)
• Google Chrome (version 5.0 and later)
• Safari (version 4.0 and later)
87'!<7(:
The Switch can be managed with an SNMP-compatible console program. The Switch supports SNMP
version 1.0, version 2.0 and version 3.0.
)::0&4
The user can also connect a computer to the serial console port to access the Switch. The command line
interface provides complete access to all Switch management features.
)(3)'&
532=!>?/&@34+(A/:9
• A terminal or a computer with both an RS-232 serial port and the ability to emulate a terminal (it is possible
to use Hyperterminal, Putty, Mimicom etc).
• A console cable with a male DB-9 connector on one end and an RJ-45 connection on the other. This cable
should be included with the Switch.
12
To Next Page
Loading...
