D-Link EXO Series User Manual

49D-Link EXO Series Router User Manual
Section 3 - Conguration
IPv4 - Static IP
Select Static IP if your IP information is provided by your Internet Service Provider (ISP). Click Save at any time to save the
changes you have made on this page.
IP Address Enter the IP address provided by your ISP.
Subnet Mask Enter the subnet mask provided by your ISP.
Default Gateway Enter the default gateway address provided by your ISP.
Primary DNS Server Enter the primary DNS server IP address assigned by your ISP.
Advanced Settings...
Secondary DNS Server Enter the secondary DNS server IP address assigned by your
ISP.
MTU Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your ISP.
MAC Address Clone The default MAC address is set to the Internet port’s physical
interface MAC address on the router. You can use the drop-
down menu to replace the Internet port’s MAC address with
the MAC address of a connected client.

D-Link EXO Series Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
MU-MIMO	Yes
Smart Connect	Yes
Beamforming	Yes
OFDMA	Yes
Security	WPA3
Frequency Bands	Dual-band
Ethernet Ports	Gigabit Ethernet
USB Ports	1 x USB 3.0
Maximum Speed	AX1800