EasyManuals Logo

D-Link EXO Series User Manual

D-Link EXO Series
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
52D-Link EXO Series Router User Manual
Section 3 - Conguration
IPv4 - PPTP
Choose PPTP (Point-to-Point-Tunneling Protocol) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will
provide you with a username and password. Click Save at any time to save the changes you have made on this page.
PPTP Server Enter the PPTP server IP address provided by your ISP.
Username Enter the username provided by your ISP.
Password Enter the password provided by your ISP.
Reconnect Mode Select either Always on, On Demand, or Manual.
Maximum Idle Time Congurable when On Demand is selected. Enter a maximum
idle time during which the Internet connection is maintained
during inactivity. To disable this feature, select Always on as
the reconnect mode.
Advanced Settings...
Address Mode Select Static IP if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic IP.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link EXO Series and is the answer not in the manual?

D-Link EXO Series Specifications

General IconGeneral
Wi-Fi StandardWi-Fi 6 (802.11ax)
MU-MIMOYes
Smart ConnectYes
BeamformingYes
OFDMAYes
SecurityWPA3
Frequency BandsDual-band
Ethernet PortsGigabit Ethernet
USB Ports1 x USB 3.0
Maximum SpeedAX1800

Related product manuals