9
Step 2 - Within two minutes, press the WPS button on your wireless client (or
launch the software utility and start the WPS process).
Step 3 - Allow up to one minute to congure. Once the Internet light stops
blinking, you will be connected and your wireless connection will be secure with
WPA2.
Connect your Clients using WPS
The easiest and most secure way to connect your wireless devices to the router
is WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters,
media players, Blu-ray DVD players, wireless printers, and cameras will have a WPS
button (or a software utility with WPS) that you can press to connect to the router.
Please refer to your user manual for the wireless device you want to connect to
make sure you understand how to enable WPS. Once you know, follow the steps
below:
Step 1 - Press the WPS button on the side of the router for about one second. The
Internet LED on the front will start to blink.
WPS Button
To Next Page
Loading...
