D-Link GO-SW-16G

Rear Panel Description
The power cable connection is located on the rear panel of the Switch.
DC Power Jack:
Power is supplied through an external 12V/1A AC power adapter for
GO-SW-16G and an external 12V/1.5A AC power adapter for GO-SW-
24G. Check the technical specification section for information about the
AC power input voltage.
• GO-SW-16G
GO-SW-16G Rear Panel
• GO-SW-24G
GO-SW-24G Rear Panel
10/100/1000BASE-T Ports:
There are 16/24 Gigabit Ethernet, Auto-Negotiating ports
(10/100/1000Mbps)
Comprehensive LED indicators display the conditions of the Switch and
status of the network.
13