EasyManuals Logo

D-Link GO-SW-16G User Manual

D-Link GO-SW-16G
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
SECTION 1
Introduction
About This Guide
Switch Description
Switch Features
D-Link Green Technology
Ports
Front-Panel Components
LED Indicators
Power Input on Rear Panel
About This Guide
Congratulations on your purchase of the 16/24-PORT GIGABIT EASY
DESKTOP SWITCH. These devices are using compact plastic case
and are highly flexible solution for SOHO or small office customers.
Switch Description
The 16-port GO-SW-16G and 24-port GO-SW-24G Switches provide
dedicated 10, 100 or 1000 Mbps Ethernet bandwidth on each port. The
ports will automatically detect the speed, duplex and MDI/MDIX status
of the device it is connecting to, and adjust these settings accordingly.
The Switch ports can be used to network computers, printers, servers,
routers, other switches or any device equipped with an Ethernet port.
For best performance, use Category 5 or better Ethernet cabling.
This stand alone Switch is very easy to set up. There is no network
management is required; simply power on the Switch and connect the
cables.
However, please keep in mind that the standard rules of available
Ethernet cable length from one device to another which cannot exceed
100 meters (or 300 feet).
8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link GO-SW-16G and is the answer not in the manual?

D-Link GO-SW-16G Specifications

General IconGeneral
Switch typeUnmanaged
Switch layerL2
Quality of Service (QoS) supportYes
Power connectorDC-in jack
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity16
10G supportNo
Networking standardsIEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates10, 100, 1000 Mbit/s
Copper ethernet cabling technology1000BASE-T, 100BASE-TX, 10BASE-T
Jumbo frames9216
Forwarding rate23.81 Mpps
Number of queues8
MAC address table8000 entries
Packet buffer memory0.512 MB
Stackable-
Form factor1U
CertificationCE Class A, FCC Class A, VCCI Class A, BSMI, CCC UL, CB, LVD, BSMI, CCC
Product colorBlack
Number of fans0 fan(s)
Housing materialMetal
Mean time between failures (MTBF)305171 h
Heat dissipation39.92 BTU/h
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Package depth328 mm
Package width180 mm
Package height108 mm
Package weight1450 g
Pallet width1200 mm
Pallet length1100 mm
Pallet height (air)2055 mm
Pallet gross weight (air)491500 g
Quantity per pallet (air)300 pc(s)
Shipping (inner) case width340 mm
Shipping (inner) case height384 mm
Shipping (inner) case length569 mm
Shipping (inner) case weight15550 g
Shipping (inner) case net weight15000 g
Number of cartons per pallet (air)30 pc(s)
Quantity per shipping (inner) case10 pc(s)
Input current1 A
DC input voltage12 V
Power consumption (max)11.7 W
Number of power supply units1
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth126 mm
Width280 mm
Height44 mm
Weight870 g

Related product manuals