D-Link PowerLine N150 Mini - Network Settings; Static IP

20D-Link DHP-W221AV User Manual
Section 3 - Conguration
Network Settings
Static IP
This section will allow you to change the local network settings of the DHP-W220AV and to congure the DHCP settings.
Select Static IP to manually enter the IP settings supplied by
your ISP.
Enter the IP address of the router. The default IP address is
192.168.0.50.
If you change the IP address, once you click Save Settings, you
will need to enter the new IP address in your browser in order
to log in to the conguration utility in the future.
Enter the subnet mask. The default subnet mask is 255.255.255.0.
Enter the default gateway IP address.
Enter the primary DNS server as provided by your ISP.
Enter an optional DNS server as provided by your ISP.
Enter the name of the router.
LAN Connection
Type:
IPv4 Address:
Subnet Mask:
Default Gateway:
Primary DNS
Server:
Secondary DNS
Server:
Device Name: