14
Using the Setup Wizard (continued)
Click Next
The Connection Mode
depends on how your camera
is connected to your network.
Click Infrastructure for use
with a router or Adhoc for a
peer-to-peer connection. The
Network Name, Wireless
Channel, and Encryption Keys
MUST correspond with your
wireless network settings for
the camera to work.
The IP Address, Subnet Mask
of your camera, Gateway, and
DNS addresses must correspond
with your network settings for
you to access the camera. If
you are unsure of what these
settings should be, please check
with your network administrator.
Click Next
To Next Page
Loading...
