30
ROUTER SET-UP AND INSTALLATION
The following steps generally apply to any router that you have on your network. The
D-Link DI-614+ is used as an example to clarify the configuration process.
Determine Your Router’s WAN IP Address
Your WAN IP
Address
information
will be listed
here.
Note: Because a dynamic WAN IP address can change from time to time
depending on your ISP, you may want to obtain a Static IP address from your
ISP. A Static IP address is a fixed IP address that will not change over time
and will be more convenient for you to use to access your camera from a
remote location. You can use DDNS to obtain an IP address, please refer to
P.22 for more information.
Installing the DCS-900W Behind a Router
DCS-900W Configuration (continued)
To Next Page
Loading...
