7D-Link ShareCenter Shadow DNS-325 User Manual
Section 2 - Getting Started
When rst powered on, during the initial boot sequence, the ShareCenter will wait to be assigned an IP address via
DHCP. If it does not receive a DHCP assigned IP address the Auto-IP process will assign a 169.254.xxx.xxx address to
the ShareCenter. It is recommended that the included D-Link Storage Utility be used when accessing and conguring
the ShareCenter for the rst time. If you want to change the IP address before logging in or are unable to connect to
the ShareCenter IP address, you can use the Storage Utility provided on the product CD to locate the device on your
network and make any needed changes.
D-Link Storage Utility
Network
Storage Device
The D-Link Storage Utility displays any
ShareCenter™ devices it detects on the
network here.
Refresh
Click Refresh to refresh the device list.
Configuration
Click Conguration to access the Web based
conguration of the ShareCenter™.
LAN
Co n f i g u r e th e LA N Set t i n g s for th e
ShareCenter™ here.
Apply
Click Apply to save changes to the LAN
Settings.
Connect
Click Connect to connect to the iSCSI target.
Management
Click Management to edit the information.
Drive Mapping
Volumes available for mapping are displayed
here.
Available Drive
Letters
Choose an available drive letter. Click Connect
to map the selected volume. Click Disconnect
to disconnect the selected mapped volume.
About
Click About to view the software version of the
Easy Search Utility.
Exit
Click Exit to close the utility.
To Next Page
Loading...
Need help?
General
