31D-Link ShareCenter Shadow DNS-325 User Manual
Section 4 - Configuration
Hard Drive Configuration Wizard
When you click on the “Set RAID type and Re-Format button in the Disk Management-Hard Drive Configuration menu a wizard will execute allowing you to format your
drives and create the volume RAID format. The following is an example of a RAID1 volume configuration:
Initially the steps of the conguration process are
shown. You must decide on the RAID type you
would like to format your HDDs with. Click the
Next button to continue with the conguration or
exit to cancel it.
Step 1 displays the currently installed HDD
information. Any data on the installed HDDs will
be lost by the formatting. Click Next to continue.
To Next Page
Loading...
