43DSL-2750B User Guide
Remote Administration
Remote management allows the Gateway to be congured from the Internet by a web browser. A username
and password is still required to access the Web-Management interface.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the Gateway and 8080 is the port used for
the Web Management interface.
Allow Incoming WAN Access to Web
Management:
Diagnostic Tools:
Check the box of the port you want to use. The default port is 80.
Check the box to activate the diagnostic tools rule.
To Next Page
Loading...
