Name: D-Link Wireless N Router DIR-615
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

14D-Link DIR-615 User Manual

Section 3 - Conﬁguration

If you selected Dynamic, you may need to enter the MAC address of the

computer that was last connected directly to your modem. If you are currently

using that computer, click Clone Your PC’s MAC Address and then click

Next to continue.

The Host Name is optional but may be required by some ISPs. The default

host name is the device name of the Router and may be changed.

If you selected PPPoE, enter your PPPoE username and password. Click

Next to continue.

Select Static if your ISP assigned you the IP address, subnet mask, gateway,

and DNS server addresses.

Note: Make sure to remove your PPPoE software from your computer. The

software is no longer needed and will not work through a router.

If you selected PPTP, enter your PPTP username and password. Click Next

to continue.

Questions and Answers:

Need help?

Do you have a question about the D-Link Wireless N Router DIR-615 and is the answer not in the manual?

D-Link Wireless N Router DIR-615 Specifications

General