81D-Link DIR-855L User Manual
Section 3 - Conguration
Enter a name for the inbound lter rule.
Select Allow or Deny.
Check to enable the rule.
Enter the starting IP address. Enter 0.0.0.0 if you
do not want to specify an IP range.
Enter the ending IP address. Enter 255.255.255.255
if you do not want to specify and IP range.
Click the Add button to apply your settings. You
must click Save Settings at the top to save the
settings.
This section will list any rules that are created. You
may click the Edit icon to change the settings or
enable/disable the rule, or click the Delete icon
to remove the rule.
Name:
Action:
Enable:
Remote IP Start:
Remote IP End:
Add:
Inbound Filter
Rules List:
The Inbound Filter feature provides an advanced method of controlling data received from the Internet. With this feature, you
can congure inbound data ltering rules that control data based on an IP address range. Inbound Filters can be used with
Virtual Server, Port Forwarding, or Remote Administration features.
Inbound Filters
To Next Page
Loading...
Need help?
General
