25D-Link DAP-1522 User Manual
Section 3 - Configuration
The Auto Channel Scan setting can be selected to allow the DAP-1522 to choose the channel with the least amount of
interference.
Indicates the channel setting for the DAP-1522. The Channel can be changed to fit the channel setting for an existing wireless
network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.
Select the transmit rate. It is strongly suggested to select Best (automatic) for best performance.
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DAP-1522. If Invisible is
selected, the SSID of the DAP-1522 will not be seen by Site Survey utilities so your wireless clients will have to know the
SSID of your DAP-1522 in order to connect to it.
Refer to page 65 for more information regarding the wireless security.
Enable the Wi-Fi Protected Setup feature.
Locking the wireless security settings prevents the settings from being changed by any new external user using its PIN. Devices
can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network settings
with Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager user.
Shows the current value of the access point’s PIN.
Create a random number that is a valid PIN. This becomes the access point’s PIN. You can then copy this PIN to the user
interface of the user.
Restore the default PIN of the access point.
Resets Wi-Fi Protected Status to Not Configured. Vista WPS icon will only be displayed when the Wi-Fi Protected Status is
Not Configured.
Enable Auto
Channel Scan:
Wireless
Channel:
Transmission
Rate:
Channel Width:
Visibility
Status:
Security Mode:
Enable:
Lock Wireless
Security
Settings:
Current PIN:
Generate New
PIN:
Reset PIN to
Default:
Reset to
Unconfigured:
To Next Page
Loading...
