58D-Link DAP-1522 User Manual
Section 3 - Configuration
Transmission
Rate:
Channel Width:
Visibisibility
Status:
Security Mode:
Enable:
Select the transmit rate. It is strongly suggested to select Best (automatic) for best performance. This option is unavailableThis option is unavailable
in Bridge Mode.
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
This setting determines whether the DAP-1522 will continue to periodically broadcast its presence on the network. This optionThis option
is unavailable in Bridge Mode.
Refer to page 65 for more information regarding wireless security.
Enable the Wi-Fi Protected Setup feature.
Enabling this option allows the user to manually assign the source MAC address to packets forwarded by the DAP-1522. If not
manually assigned, the packet’s source MAC address field will be automatically selected as the DAP-1522’s MAC address.
Wireless MAC Cloning
MAC Address:
Scan:
Enter the desired MAC address connected to your DAP-1522 to enable the clone function.
Click the Scan button to search for all available devices connected to your DAP-1522’s Ethernet ports
To Next Page
Loading...
