D-Link xtreme n duo dap-1522

67D-Link DAP-1522 User Manual
Section 3 - Configuration
Save To
Local Hard
Drive:
Load From
Local Hard
Drive:
Restore
To Factory
Default:
Reboot The
Device:
Clear
Language
Pack:
Use this option to save the current access point
configuration settings to a file on the hard disk of
the computer you are using. First, click the Save
button. You will then see a file dialog, where you can
select a location and file name for the settings.
Use this option to load previously saved access
point configuration settings. First, use the Browse
control to find a previously save file of configuration
settings. Then, click the Load button to transfer
those settings to the access point.
This option will restore all configuration settings
back to the settings that were in effect at the time
the access point was shipped from the factory.
Any settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current access point configuration
settings, use the Save button above.
Click to reboot the bridge.
Click to clear the language pack. This will put the web UI back to English.
System