Need help?Do you have a question about the Da-Lite UTB Contour and is the answer not in the manual?
Lists all included hardware, including wall brackets, frame brackets, and various screws with specifications.
Detailed steps for preparing a clean area, assembling the inner frame, and hooking the screen surface grommets onto the frame.
Guidance on placing bezel pieces around the frame and securing corners with machine screws.
Instructions for attaching frame brackets to the screen's bottom edge using specific screws, based on screen size.
Steps to insert and partially tighten fillister screws into the frame brackets for screen tension adjustment.
Instructions for securing the large top and small bottom wall brackets to wall studs at the correct height.
Process for lifting the screen, hooking it onto the top bracket, and securing it with the bottom bracket.
Instructions for securing two large top and one large bottom wall brackets to wall studs at the correct height.
Process for lifting the screen, hooking it onto the top brackets, and securing it with the bottom bracket.
General| Brand | Da-Lite |
|---|---|
| Model | UTB Contour |
| Category | Projection Screen |
| Language | English |
To Next Page