English120
Care and maintenance - Oven
Care and maintenance - Oven
Rack support
Rack supports can be removed for cleaning. (Self clean, GreenClean™ and Manual clean).
Removing the rack supports
1. Grab the center of the wire, which is on
the supporter, and lift it upward.
2. Rotate the rack support by
approximately 45°.
3. Pull and remove the rack support from
two holes.
NY9900M_PRO RANGE_DOP48M96DLM_DG68-00935A-00_EN+MES+CFR.indb 120 2017-05-12 7:29:07
To Next Page
Loading...
