English 123
Care and maintenance - Oven
Removing the oven doors
CAUTION
• The door is very heavy. Be careful when removing and lifting the door.
• Do not lift the door by the handle.
Use two hands to remove an oven door. For 48" ovens, repeat the process for each
door.
A
A. Wire Harness
1. Prior to removing the oven door,
prepare a surface where you will place
it. This surface should be flat and
covered with a soft blanket. You can
also use the corner posts from your
packaging material.
A
B
A. Oven door hinge latch in locked
position
B. Oven door hinge latch in unlocked
position
2. Open the oven door.
3. Locate the oven door hinge latch locks
in both corners of the oven door, and
then rotate the hinge locks toward the
oven door to the unlocked position. If
the door hinge lock is not rotated fully
(see illustration B on the left for an
example of full rotation), you will not
be able to remove the door properly.
NY9900M_PRO RANGE_DOP48M96DLM_DG68-00935A-00_EN+MES+CFR.indb 123 2017-05-12 7:29:08
To Next Page
Loading...
Need help?
General
