Installation instructions
English34
Overlay Type Frameless Type
1 1/2”
(40 mm)
Panel
ready
Top view
Product
Chassis spacer
Chassis spacer
1 1/2”
(40 mm)
Panel
ready
Top view
Product
CAUTION
As you push the refrigerator into its enclosure, take care not to damage the water line and
power cord.
The water hose must be xed to the ground before pulled out to the front. Also, arrange
the power cord behind the appliance to ensure that it is not stepped on or over.
WARNING
While moving the refrigerator, take care not to harm assisting personnel or the
refrigerator itself.
1. Before moving the refrigerator, connect the power cord. Before installation, turn the
refrigerator on and make sure the room lamp and the display operate properly with no
information code appearing.
2. Place packaging cardboard or plywood in the refrigerator’s path to protect the ooring
while moving the appliance.
3. Carefully push the refrigerator into its enclosure. When inserting the refrigerator, make
sure it is positioned in the center of the cabinet.
4. Align the forward edge of the chassis spacer with the vertical line you marked on the
cabinet.
Dacor_T-TYPE_BRF9000M_IM_DA68-03621F-00_EN.indd 34 2017-09-28 3:10:14
To Next Page
Loading...
Need help?
General
